What are cartridge heaters used for?
What are cartridge heaters used for?
Cartridge heaters are most frequently used for heating dies, platens, molds, and other metal parts by insertion into drilled holes. They can also be used in liquid immersion applications.
A Cartridge Heater consists of resistance coil wound around a ceramic core that is surround by dielectric and encased in a metal sheath. Powered heat transferred through the coil to the sheath causes the sheath to heat up. This heat is then transferred to the inside metal part requiring heat.
The Heater Construction as Below:
- Technical Data:
1. Material:SS304/SS316/SS321/Incoloy800 etc.
2. Insulation Material: High-purity Mgo
3. Resistant wire element: Ni-Cr or FeCr
4. Lead Connection Option: Crimped or Swaged leads
5. Lead and type of connection leads: 10" Fiberglass Standard
(Wire options: Teflon, silicone high temperature frber glass)
6. Cartridge heater categories:
1). High power density (heat area surface power 10~25W/cm²)
Working temperature≤450 degrees.
2). middle, low power density (heat area surface power 5~11W/cm²)
Working temperature≤300 degrees.
- Applications:
- Medical: Dialysis, Sterilization, Blood Analyzer, Nebulizer, Blood/Fluid Warmer, Temperature Therapy
- Telecommunications: Deicing, Enclosure Heater
- Transportation: Oil/Block Heater, Aircraft Coffee Pot Heaters,
- Food Service: Steamers, Dish Washers,
- Industrial: Packaging Equipment, Hole Punches, Hot Stamp.
- When inquiry, pls kindly provide us:
1) If have drawing, it will be helpful.
2) Tube diameter, tube length, voltage, wattage, shape
3) Working temperature
4) Material requirement
5) Quantity
Contact Now
