Spiral Hot Runner Coil Brass Enail Nozzle Heater

Coil Heater features continuous operating temperatures up to 1200°F. Rapid heating and cooling occur, due to the low mass construction. All heating elements are sealed from contamination and the stainless steel sheath provides maximum corrosion resistance. An optional internal Thermocouple may be utilized for precise control.  Its high working temperature, fast heating, uniform heating precision, long service life, can be automatically controlled area, high thermal conduction, while internal heating material damage, external can be reuses.

Technical Data:

Product name	Industrial electric spring hot runner coil copper brass sealed nozzle Mica Band Heater for plastic machinery
Insulation Material	High Pure MgO
Resistance Wire	Cr20Ni80
Die Electrical Strength	800V A/C
Resistance tolerance	10%
Heating coil I.D	8mm~40mm
Max power density	9W/cm²
Cross sections optional	2.2x4.2mm 3x3mm 3.4x3.4mm 3.5x3.5m 4x4mm, any other cross-sections can be supplied on request
High voltage stability test	Less than 0.5mA leak under 1000V for 30 seconds
Cold zone length	50mm standard, and other sizes available
D of cold zone adaptor	8x30mm and 6.35x25mm optional
Standard leads	1000mm black PTFE wire over 300℃
Working life	10,000 hours under less than 400℃ minus and 2000 hours at 700℃
Surface treatment	Silver sandblasted or black

-- Hot Runner Heater for Applications

1.Injection molding machine nozzle
2. Hot Runner Nozzles & Bushings
3. Packaging machinery
4. Hot runner Injection Molds

5. Injection & Blow Molding Machine Nozzles
6. PET preform & Thin wall container Molds
7. Hot runner Manifolds

Relative products: